Stiga

The Park Pro 16 4WD is fitted with a  twin cylinder Briggs & Stratton Vanguard engine with a displacement of 479cc the engine develops 9.4kW. This engine will power the full range of Stiga cutter decks with manual or electric height adjustment control. The hi spec 4WD transmission system has a separate 10 litres per min hydraulic pump delivering a full speed of 11KPH through the heavy duty Kanzaki transaxles to the large 17” front and rear wheels. The PTO clutch is electro magnetically controlled; the fuel tank capacity is a massive 14 litres.

The machine is fitted with a single lever adjusted, high back comfort seat fitted onto parallel suspension, mechanical servo steering, a single LED headlight and an hour meter to record working hours for servicing.

Imagine driving around your garden effortlessly creating a perfectly clipped healthy green lawn, no longer restricted to driving up and down in straight lines, scuffing up the ground turning on the same areas and wasting fuel and time collecting grass clippings that will sit in an unsightly rotting pile at the bottom of your garden.

Imagine easily coping with soft wet ground conditions on a flat or sloping garden, manoeuvring quickly around all sorts of obstacles without worrying about your rear wheels dropping of the edge of the lawn or catching the back of your tractor on fences, trees or even your new greenhouse.

Imagine being able to trim under overhanging shrubs and into corners because your Multiclip cutter deck is positioned at the front of the machine where you can always clearly see it and it cuts the grass before your wheels have a chance to lay it flat. Only a 4WD Stiga Park Pro 16 can provide you with such an enjoyable way to maintain and improve your lawn and paddock areas, turning this chore into a ‘Drive in the Park’.

Stiga’s unique articulated chassis design ensures that the rear wheels follow exactly in the path of the front cutter deck.  This is because the chassis pivots at the centre point of the front and rear axles leaving you free to concentrate on looking forward at the grass that you’re about to cut rather than worrying about the obstacles that you have just passed. The articulated chassis design also means that the simple and effective 4WD system eliminates any tyre scuffing on your lawn whilst turning as well as ensuring excellent traction in wet conditions and on sloping ground.

The first thing that you should consider when selecting the correct 4WD Stiga Park for your needs is the type of cutter deck you require, as this will determine the minimum power requirement for your particular machine.  If you are concerned about access through gateways or narrow paths then add 10cm to the cutting width of the deck, this will be enough to allow you to drive your machine through the gap easily.

For formal lawn areas with an occasional requirement for long grass cutting, for example cutting down longer grass after daffodils have flowered, our 95cm and 105cm ‘Multiclip Combi’ decks are ideal. If you need to regularly trim roadside verges, paddock/orchard areas or just have a large amount of mowing to do then our 110cm or 125cm ‘Pro Combi’ would be more suitable. The ‘Multiclip Combi’ cutter decks can be used on all of our 4WD Stiga Parks and the ‘Pro Combi’ cutter decks should be used on models fitted with twin cylinder engines.

Stiga have been building mowers since 1974 and all models are designed with functionality, reliability, comfort, quality and the environment in mind.

Built today for tomorrow, all models come with a 3 year warranty on the mower and a 10 year warranty on the chassis.